jdb电子

接待来到jdb电子网站,我们竭诚为您效劳

行业新闻
目今位置:首页-资讯中央>行业新闻一种地埋电缆探测装备的制作要领

一种地埋电缆探测装备的制作要领

泉源:/ 宣布时间:日期:2022-12-16 0
随着时代的生长和科技的前进,我们的家用电器日益增多,对电能的需求也越来越大,线路的延展越来越长,拓扑结构越来越重大 。下面地埋探测厂家就来讲讲一种地埋电缆探测装备的制作要领 。
With the development of the times and the progress of science and technology, our household appliances are increasing, the demand for electric energy is also growing, the extension of lines is getting longer and longer, and the topology is getting more and more complex. The following is a method of making buried cable detection equipment.
由于地下敷设电缆不占空间,现代化大都市大多接纳地埋电缆取代高空架设电缆,尤其是住民区、商业区、工业区等地方 。而现代化大都市大多接纳地埋电缆取代高空架设电缆,这就给电缆故障磨练、增容等带来诸多未便 。
Because underground cable laying does not take up space, most modern metropolises use buried cables instead of overhead cables, especially in residential areas, commercial areas, industrial areas and other places. Most modern metropolises use buried cables instead of overhead cables, which brings a lot of inconvenience to cable troubleshooting and capacity expansion.
特殊是设计施工图纸遗失,或者缺少相关文档资料的,更是大大增添了施工难度 。这就导致了一旦泛起故障,不可快速判断电缆路径以及电缆的深度,不可快速对电缆路径和故障点举行定位,往往需要人工大面积挖掘,费时艰辛 。主要提供了一种地埋电缆探测装备用以上述配景手艺中提出的手艺问题 。
In particular, the loss of design and construction drawings or the lack of relevant documents greatly increases the construction difficulty. This results in that once a fault occurs, the cable path and cable depth cannot be quickly determined, and the cable path and fault point cannot be quickly located. It often requires manual excavation in a large area, which is time-consuming and laborious. This paper mainly provides an underground cable detection equipment to solve the technical problems raised in the above background technology.
地埋探测
一种地埋电缆探测装备,包括有发射?橐约耙来蔚缗连的信号收罗?椤⑿畔⒋χ贸头D?椤⑽⒋χ贸头F骱拖允灸?,所述发射?榘ㄓ谐薪酉,所述承接箱的内部牢靠有发射机,所述发射机与所述承接箱的内壁之间形成有储纳槽,所述信号收罗?榘ㄓ信连杆,所述毗连杆位于所述储纳槽的槽体内部,所述毗连杆的底端牢靠有连讨论,所述连讨论的内部牢靠感应天线和第二感应天线 。
An underground cable detection device includes a transmitting module, a signal acquisition module, an information processing module, a microprocessor and a display module which are electrically connected in turn. The transmitting module includes a receiving box, the inside of which is fixed with a transmitter. A storage tank is formed between the transmitter and the inner wall of the receiving box. The signal acquisition module includes a connecting rod which is located inside the tank body of the storage tank, The bottom end of the connecting rod is fixed with a connector, and the first induction antenna and the second induction antenna are fixed inside the connector.
详细操作方法如下:
The specific operation mode is as follows:
使用探测装备对电缆举行丈量时,将待测电缆与发射?1中的发射机12相毗连,使得发射机12输出16种频率的正弦交流信号,再手持毗连杆22以及吸收器31移动电缆的大致装置区域,由于毗连杆22底端通过连讨论23牢靠有感应天线24和第二感应天线25,感应天线24与第二感应天线25处于统一平面内,并且坚持相互笔直时,左右同步平行移动感应天线24以及第二感应天线25,当感应天线24以及第二感应天线25处于待测地埋电缆正上方时吸收到的正弦交流信号强;感应天线24吸收到的信号为待测地埋电缆到地面的电势,第二感应天线25收到的信号为待测地埋电缆到地面再加上感应天线24以及第二感应天线25之间的电势 。
When using the detection equipment to measure the cable, first connect the cable to be tested with the transmitter 12 in the transmission module 1, so that the transmitter 12 outputs sinusoidal AC signals of 16 frequencies, and then hold the connecting rod 22 and the receiver 31 to move to the approximate installation area of the cable. Since the bottom end of the connecting rod 22 is fixed with the first inductive antenna 24 and the second inductive antenna 25 through the connector 23, When the first induction antenna 24 and the second induction antenna 25 are in the same plane and are kept perpendicular to each other, the first induction antenna 24 and the second induction antenna 25 are moved synchronously and horizontally. When the first induction antenna 24 and the second induction antenna 25 are directly above the buried cable to be measured, the received sinusoidal AC signal is strong; The signal received by the first inductive antenna 24 is the potential between the buried cable to be measured and the ground, and the signal received by the second inductive antenna 25 is the potential between the buried cable to be measured and the ground plus the potential between the first inductive antenna 24 and the second inductive antenna 25.
上述团结附图对举行了示例性形貌,显然详细实现并不受上述方法的限制,只要接纳了要领构想和手艺计划举行的这种非实质刷新,或未经刷新将构想和手艺计划直接应用于其他场合的,均在;す婺V 。更多相关内容就来我们网站举行咨询相识吧!
The above is illustrated with the accompanying drawings. Obviously, the specific implementation is not limited by the above methods. As long as such non substantial improvement is made by adopting the method concept and technical solution, or the idea and technical solution are directly applied to other occasions without improvement, they are within the scope of protection. More relevant content will come to our website Consult and understand!

相关产品 / Related products

  • 地钉

    地钉

  • 地钉

    地钉

  • 警示桩

    警示桩

  • 警示桩

    警示桩

截屏,微信识别二维码

【网站地图】【sitemap】