jdb电子

接待来到jdb电子网站 ,我们竭诚为您效劳

公司新闻
目今位置:首页-资讯中央>公司新闻大批量定制标识桩要注重多个事项

大批量定制标识桩要注重多个事项

泉源:/ 宣布时间:日期:2022-07-07 0
标识桩的种类分成多种多样 ,在定制标识桩及附产品系列时有奇异要求时要告之厂家 ,务求使标识桩更为可用 ,特殊是在关于奇异园地 ,有非通例准时更应详尽相同交流。那么大批量定制标识桩有什么常见问题呢?要注重什么呢?
The types of identification piles are diverse. When there are unique requirements for customizing identification piles and attached product series, you should inform the manufacturer to make the identification piles more usable, especially when there are special regulations for unique sites, you should communicate in detail. So what are the common problems with mass customization of identification piles? What should we pay attention to?
一、注重制做原质料是不是防侵蚀。由于标识桩一样平常恒久在户外 ,因此划定所制做标牌的原质料具备很好的防水防雨性和耐热性 ,这会决议标识桩的使用寿命。
1、 Pay attention to whether the raw materials are anticorrosive. Because the sign pile is usually outdoors for a long time, it is required that the raw materials of the signs made have good waterproof, rainproof and heat resistance, which will determine the service life of the sign pile.
二、注重加工工艺是不是及格。在大批量定制钢构_标识桩时切忌忽视加工工艺 ,古板手工艺只管可在外型上确保标识桩的雅观大方性 ,可是在详细应用时间逐步显出弱点。因此为了确保标识桩的耐用度 ,需体贴加工工艺 ,如丝印油墨、冲印照片、喷漆等标识桩加工工艺。
2、 Pay attention to whether the processing technology is qualified. In mass customization of steel structure_ Do not neglect the processing technology when marking piles. Although the traditional handicraft can ensure the beauty and generosity of the marking piles in appearance, it gradually shows its shortcomings in specific applications. Therefore, in order to ensure the durability of the identification pile, we need to care about the processing technology, such as silk screen printing ink, printing photos, painting and other identification pile processing technology.
三、注重运送难题。一样平常标牌原质料为铝合金板 ,因此一定要着重体贴其运输 ,要相识商家是不是确保运送性 ,避免在运送中弯曲。特殊是在针对大批量定制标识桩而言 ,一样平常运送时须定制木箱包装。
3、 Pay attention to transportation problems. Generally, the raw material of signs is aluminum alloy plate, so we must pay attention to its transportation, and understand whether the merchants ensure the transportation safety and prevent bending during transportation. Especially for the mass customization of identification piles, it is generally necessary to customize the wooden box packaging during transportation.
四、注重反光性 ,尤需防掉下来和褪色。因供水标识桩的多样性 ,因此一样平常在大批量定制时还需要注重标牌返光是不是及格 ,需要商家效劳允许反光贴的质保期限期 ,避免在较短期内内反光贴掉下来或褪色 ,这也关联到周围情形的职员 ,需尤其注重。
4、 Pay attention to reflection, especially to prevent falling and fading. Due to the diversity of water supply sign posts, it is generally necessary to pay attention to whether the backlight of signs is qualified when mass customization is carried out, and the warranty period of reflective stickers needs to be guaranteed by the business service commitment to prevent reflective stickers from falling or fading in a relatively short time, which is also related to the safety of personnel in the surrounding environment, so special attention should be paid.
供水标识桩
别的标识桩的基础 ,埋深一样平常属于浅基础 ,可以设计成不必设置受力钢筋的刚性基础型式:位于桥梁上的标记 ,应通过盘算设置须要的受力钢筋:当刚性基础过于重大或标记位置处士质不良时 ,可以思量设计桩基础。
In addition, the buried depth of the foundation of the identification pile is generally shallow foundation, which can be designed into a rigid foundation type without the need to configure the stress reinforcement: the sign located on the bridge should be equipped with the necessary stress reinforcement through calculation: when the rigid foundation is too large or the sign location is poor, the pile foundation can be designed.
基础应力的盘算:确定基础的埋置深度或结构尺寸后,应先凭证很倒运于情形下的荷载组合 ,盘算基底的应力,应只管阻止基底泛起负应力(基底负应力面积不大于所有面积的1/4) ,不然应思量基底应力的重漫衍  ;妆⒌挠ατΣ涣杓莸鼗至Σ愕那慷燃吹鼗市沓性亓。
Calculation of foundation stress: after determining the embedment depth or structural size of the foundation, the stress of the base should be calculated according to the load combination under very unfavorable conditions, and the negative stress of the base should be avoided as far as possible (the negative stress area of the base is not more than 1/4 of the total area), otherwise the redistribution of the base stress should be considered. The stress of the foundation shall not exceed the strength of the foundation bearing layer, that is, the allowable bearing capacity of the foundation.
供水标识桩设置时基底协力偏心距验算:基底协力偏心距应不凌驾基底的焦点半径 ,使基底应力尽可能漫衍较量匀称 ,以免基底两侧应力相差过大 ,基础爆发较大的不匀称沉降。
Check calculation of the eccentricity of the resultant force of the foundation base when setting the water supply marker pile: the eccentricity of the resultant force of the foundation base should not exceed the core radius of the foundation base, so that the stress distribution of the foundation base is relatively uniform as far as possible, so as to prevent the stress difference on both sides of the foundation base from being too large, resulting in large uneven settlement of the foundation.
基础倾覆稳固性验算:应使抗倾覆稳固系数大于1. 1-1.3。
Checking calculation of foundation overturning stability: the anti overturning stability coefficient should be greater than 1 1-1.3。
应使抗滑动稳固系数大于1.2-1.3。
The anti sliding stability coefficient shall be greater than 1.2-1.3.
以上就是问题解答的相关内容了 ,希望能够资助到各人 ,如对这一问题还保存任何疑问 ,都接待关注我们网站并咨询我们的事情职员 ,将竭诚为您效劳。
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website And consult our staff, will serve you wholeheartedly.

相关产品 / Related products

  • 地钉

    地钉

  • 地钉

    地钉

  • 警示桩

    警示桩

  • 警示桩

    警示桩

截屏 ,微信识别二维码

【网站地图】【sitemap】